Norme internationale
ISO 10333-1:2000
Systèmes individuels d'arrêt de chute — Partie 1: Harnais complet
Numéro de référence
ISO 10333-1:2000
Edition 1
Norme internationale
ISO 10333-1:2000
Indisponible en français
Publiée (Edition 1, 2000)
Cette norme a été révisée et confirmée pour la dernière fois en 2016. Cette édition reste donc d’actualité.
Cette norme comprend 1 amendement.

ISO 10333-1:2000

ISO 10333-1:2000
CHF 129
Convertir les francs suisses (CHF) dans une autre devise


This part of ISO 10333 specifies the requirements, test methods, instructions for general use, marking, packaging and

maintenance for full-body harnesses (FBH).

The main purpose of a FBH is to allow the user to connect into a personal fall-arrest system (PFAS), which will be

specified in a future International Standard (see ISO 10333-6 in the Bibliography), such that if an arrest takes place,

the arresting force will not exceed 6 kN.

For the purposes of this part of ISO 10333, FBH may have attachment elements that allow the user to connect into

other types of safety or access system, for example a work-positioning system, a controlled descent/ascent system or

a confined-space access system. This part of ISO 10333 includes requirements for such attachment elements.

This part of ISO 10333 is applicable only to FBH limited to single-person use of a total mass not exceeding 100 kg.

NOTE Users of fall-protection equipment whose total mass (including tools and equipment) exceeds 100 kg are advised to

seek advice from the equipment manufacturer regarding the suitability of the equipment, which may need additional testing.

The scope of this part of ISO 10333 does not extend to:

a) waist belts or chest harnesses: such equipment is not considered as safe to use in personal fall-arrest systems


b) all other types of harnesses that are not designed primarily for use in PFAS;

c) other special requirements for FBH, peculiar to use in a controlled descent/ascent system or a confined-space

access system;

d) any assessment of compatibility or suitability in respect of the performance of FBH in a controlled

descent/ascent system or a confined-space access system.

This part of ISO 10333 does not specify those additional requirements that would apply when harnesses are subjected

to special conditions of use (where, for example, there exist unusual limitations concerning access to the place of work

and/or particular environmental factors). Thus treatments to ensure the durability of the materials of construction (such

as heat treatment, anti-corrosion treatment, protection against physical and chemical hazards) are not specified in this

part of ISO 10333, but should comply with appropriate International Standards or, failing that, with national standards

and other specifications dealing with relevant physical characteristics and/or the safety of users. In particular, when it is

considered necessary to test the corrosion resistance of metallic parts of the equipment, reference should be made to

ISO 9227.

Informations générales

  •  : Publiée
     : 2000-07
    : Clôture de l'examen [90.60]
  •  : 1
  • ISO/TC 94
  • RSS mises à jour


Des amendements sont publiés lorsqu’il s’avère que de nouveaux éléments doivent être ajoutés à un document normatif existant. Ils peuvent également inclure des corrections d’ordre rédactionnel ou technique à appliquer au document en vigueur.

Amendement 1

Edition 2002

ISO 10333-1:2000/Amd 1:2002
CHF 18
Convertir les francs suisses (CHF) dans une autre devise

Cycle de vie

Vous avez une question?

Consulter notre Aide et assistance

Service à la clientèle
+41 22 749 08 88

Horaires d’ouverture:
De lundi à vendredi - 09:00-12:00, 14:00-17:00 (UTC+1)