Фильтр :
Стандарт и/или проект | Этап | ТК |
---|---|---|
Air quality — Determination of gaseous sulphur compounds in ambient air — Sampling equipment
|
90.93 | ISO/TC 146/SC 3 |
Ambient air — Determination of a gaseous acid air pollution index — Titrimetric method with indicator or potentiometric end-point detection
|
90.93 | ISO/TC 146/SC 3 |
Air quality — Determination of mass concentration of sulphur dioxide in ambient air — Thorin spectrophotometric method
|
90.93 | ISO/TC 146/SC 3 |
Ambient air — Determination of carbon monoxide — Non-dispersive infrared spectrometric method
|
90.93 | ISO/TC 146/SC 3 |
Planning of ambient air quality monitoring
|
95.99 | ISO/TC 146/SC 4 |
Ambient air — Determination of the mass concentration of sulfur dioxide — Tetrachloromercurate (TCM)/pararosaniline method
|
90.93 | ISO/TC 146/SC 3 |
Ambient air — Determination of the mass concentration of nitrogen dioxide — Modified Griess-Saltzman method
|
95.99 | ISO/TC 146/SC 3 |
Ambient air — Determination of mass concentration of nitrogen dioxide — Modified Griess-Saltzman method
|
90.93 | ISO/TC 146/SC 3 |
Air quality — Presentation of ambient air quality data in alphanumerical form
|
95.99 | ISO/TC 146/SC 4 |
Ambient air — Determination of the mass concentration of nitrogen oxides — Chemiluminescence method
|
90.93 | ISO/TC 146/SC 3 |
Ambient air — Determination of the mass concentration of carbon monoxide — Gas chromatographic method
|
90.93 | ISO/TC 146/SC 3 |
Air quality — Stratified sampling method for assessment of ambient air quality
|
90.93 | ISO/TC 146/SC 4 |
Ambient air — Determination of a black smoke index
|
90.93 | ISO/TC 146/SC 3 |
Ambient air — Determination of the particulate lead content of aerosols collected on filters — Atomic absorption spectrometric method
|
90.93 | ISO/TC 146/SC 3 |
Ambient air — Determination of asbestos fibres — Direct transfer transmission electron microscopy method
|
95.99 | ISO/TC 146/SC 3 |
Ambient air — Determination of asbestos fibres — Direct transfer transmission electron microscopy method
|
90.20 | ISO/TC 146/SC 3 |
Ambient air — Determination of the mass concentration of ozone — Chemiluminescence method
|
90.93 | ISO/TC 146/SC 3 |
Ambient air — Determination of the mass concentration of ozone — Chemiluminescence method — Amendment 1: Consensus value for the ozone absorption cross-section at room temperature at the mercury-line wavelength (253,65 nm air)
|
60.60 | ISO/TC 146/SC 3 |
Ambient air — Measurement of the mass of particulate matter on a filter medium — Beta-ray absorption method
|
90.93 | ISO/TC 146/SC 3 |
Ambient air — Determination of sulfur dioxide — Ultraviolet fluorescence method
|
90.93 | ISO/TC 146/SC 3 |
Tobacco and tobacco products — Determination of vapour-phase nicotine in air — Gas-chromatographic method
|
95.99 | ISO/TC 126 |
Interior air of road vehicles — Part 1: Whole vehicle test chamber — Specification and method for the determination of volatile organic compounds in cabin interiors
|
95.99 | ISO/TC 146/SC 6 |
Interior air of road vehicles — Part 1: Whole vehicle test chamber — Specification and method for the determination of volatile organic compounds in cabin interiors
|
60.60 | ISO/TC 146/SC 6 |
Interior air of road vehicles — Part 2: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Bag method
|
90.93 | ISO/TC 146/SC 6 |
Interior air of road vehicles — Part 3: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Micro-scale chamber method
|
90.93 | ISO/TC 146/SC 6 |
Interior air of road vehicles — Part 4: Method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Small chamber method
|
90.93 | ISO/TC 146/SC 6 |
Interior air of road vehicles — Part 5: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials — Static chamber method
|
90.93 | ISO/TC 146/SC 6 |
Interior air of road vehicles — Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature — Small chamber method
|
90.93 | ISO/TC 146/SC 6 |
Interior air of road vehicles — Part 7: Odour determination in interior air of road vehicles and test chamber air of trim components by olfactory measurements
|
90.93 | ISO/TC 146/SC 6 |
Interior air of road vehicles — Part 8: Handling and packaging of materials and components for emission testing
|
90.93 | ISO/TC 146/SC 6 |
Interior air of road vehicles — Part 9: Determination of the emissions of volatile organic compounds from vehicle interior parts — Large bag method
|
90.93 | ISO/TC 146/SC 6 |
Interior air of road vehicles — Part 10: Whole vehicle test chamber — Specification and methods for the determination of volatile organic compounds in cabin interiors — Trucks and buses
|
60.60 | ISO/TC 146/SC 6 |
Interior air of road vehicles — Part 11: Thermal desorption analysis of organic emissions for the characterization on non-metallic materials for vehicles
|
50.00 | ISO/TC 146/SC 6 |
Interior air of road vehicles — Part 12: Textiles made from polyvinyl chloride (PVC) or polyurethane — Specification and methods for the determination of fogging characteristics of trim materials in the interior of automobiles
|
50.00 | ISO/TC 146/SC 6 |
Ambient air — Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons — Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses
|
90.93 | ISO/TC 146/SC 3 |
Ambient air — Determination of asbestos fibres — Indirect-transfer transmission electron microscopy method
|
95.99 | ISO/TC 146/SC 3 |
Ambient air — Determination of asbestos fibres — Indirect-transfer transmission electron microscopy method
|
90.20 | ISO/TC 146/SC 3 |
Air quality — Determination of ozone in ambient air — Ultraviolet photometric method
|
90.93 | ISO/TC 146/SC 3 |
Air quality — Determination of ozone in ambient air — Ultraviolet photometric method — Amendment 1: Consensus value for the ozone absorption cross-section at room temperature at the mercury-line wavelength (253,65 nm air)
|
60.60 | ISO/TC 146/SC 3 |
Air quality — Determination of total non-methane organic compounds — Cryogenic preconcentration and direct flame ionization detection method
|
90.93 | ISO/TC 146/SC 3 |
Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method
|
95.99 | ISO/TC 146/SC 3 |
Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method — Technical Corrigendum 1
|
95.99 | ISO/TC 146/SC 3 |
Ambient air — Determination of numerical concentration of inorganic fibrous particles — Scanning electron microscopy method
|
90.20 | ISO/TC 146/SC 3 |
Ambient air — Gas phase titration — Calibration of analysers for ozone
|
90.93 | ISO/TC 146/SC 3 |
Environmental tobacco smoke — Estimation of its contribution to respirable suspended particles — Determination of particulate matter by ultraviolet absorbance and by fluorescence
|
90.93 | ISO/TC 126 |
Indoor air — Part 1: General aspects of sampling strategy
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 2: Sampling strategy for formaldehyde
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds — Active sampling method
|
95.99 | ISO/TC 146/SC 6 |
Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — Active sampling method
|
95.99 | ISO/TC 146/SC 6 |
Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor and test chamber air — Active sampling method
|
90.92 | ISO/TC 146/SC 6 |
Indoor air — Part 4: Determination of formaldehyde — Diffusive sampling method
|
95.99 | ISO/TC 146/SC 6 |
Indoor air — Part 4: Determination of formaldehyde — Diffusive sampling method
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 5: Sampling strategy for volatile organic compounds (VOCs)
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS/FID
|
95.99 | ISO/TC 146/SC 6 |
Indoor air — Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID
|
95.99 | ISO/TC 146/SC 6 |
Indoor air — Part 6: Determination of organic compounds (VVOC, VOC, SVOC) in indoor and test chamber air by active sampling on sorbent tubes, thermal desorption and gas chromatography using MS or MS FID
|
60.60 | ISO/TC 146/SC 6 |
Indoor air — Part 7: Sampling strategy for determination of airborne asbestos fibre concentrations
|
90.93 | ISO/TC 146/SC 3 |
Indoor air — Part 8: Determination of local mean ages of air in buildings for characterizing ventilation conditions
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method
|
95.99 | ISO/TC 146/SC 6 |
Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method — Technical Corrigendum 1
|
95.99 | ISO/TC 146/SC 6 |
Indoor air — Part 9: Determination of the emission of volatile organic compounds from samples of building products and furnishing — Emission test chamber method
|
60.60 | ISO/TC 146/SC 6 |
Indoor air — Part 10: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test cell method
|
90.92 | ISO/TC 146/SC 6 |
Indoor air — Part 11: Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens
|
95.99 | ISO/TC 146/SC 6 |
Indoor air — Part 11: Determination of the emission of volatile organic compounds from samples of building products and furnishing — Sampling, storage of samples and preparation of test specimens
|
60.60 | ISO/TC 146/SC 6 |
Indoor air — Part 12: Sampling strategy for polychlorinated biphenyls (PCBs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polycyclic aromatic hydrocarbons (PAHs)
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 13: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) — Collection on sorbent-backed filters
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 14: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) — Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry
|
90.20 | ISO/TC 146/SC 6 |
Indoor air — Part 15: Sampling strategy for nitrogen dioxide (NO2)
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 16: Detection and enumeration of moulds — Sampling by filtration
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 17: Detection and enumeration of moulds — Culture-based method
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 17: Detection and enumeration of moulds — Culture-based method — Technical Corrigendum 1
|
60.60 | ISO/TC 146/SC 6 |
Indoor air — Part 18: Detection and enumeration of moulds — Sampling by impaction
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 18: Detection and enumeration of moulds — Sampling by impaction — Technical Corrigendum 1
|
60.60 | ISO/TC 146/SC 6 |
Indoor air — Part 19: Sampling strategy for moulds
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 20: Detection and enumeration of moulds — Determination of total spore count
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 21: Detection and enumeration of moulds — Sampling from materials
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 22: Detection and quantification of fungal biomass by fungal β-N-acetylhexosaminidase enzyme activity
|
50.20 | ISO/TC 146/SC 6 |
Indoor air — Part 23: Performance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials
|
95.99 | ISO/TC 146/SC 6 |
Indoor air — Part 23: Performance test for evaluating the reduction of formaldehyde and other carbonyl compounds concentrations by sorptive building materials
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 24: Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials
|
95.99 | ISO/TC 146/SC 6 |
Indoor air — Part 24: Performance test for evaluating the reduction of volatile organic compound concentrations by sorptive building materials
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 25: Determination of the emission of semi-volatile organic compounds by building products — Micro-chamber method
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 26: Sampling strategy for carbon dioxide (CO2)
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 27: Determination of settled fibrous dust on surfaces by SEM (scanning electron microscopy) (direct method)
|
90.93 | ISO/TC 146/SC 3 |
Indoor air — Part 28: Determination of odour emissions from building products using test chambers
|
95.99 | ISO/TC 146/SC 6 |
Indoor air — Part 28: Determination of odour emissions from building products using test chambers
|
60.60 | ISO/TC 146/SC 6 |
Indoor air — Part 29: Test methods for VOC detectors
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 30: Sensory testing of indoor air
|
90.20 | ISO/TC 146/SC 6 |
Indoor air — Part 31: Measurement of flame retardants and plasticizers based on organophosphorus compounds — Phosphoric acid ester
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 32: Investigation of buildings for the occurrence of pollutants
|
90.20 | ISO/TC 146/SC 6 |
Indoor air — Part 33: Determination of phthalates with gas chromatography/mass spectrometry (GC/MS)
|
95.99 | ISO/TC 146/SC 6 |
Indoor air — Part 33: Determination of phthalates with gas chromatography/mass spectrometry (GC/MS)
|
60.60 | ISO/TC 146/SC 6 |
Indoor air — Part 34: Strategies for the measurement of airborne particles
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 36: Standard method for assessing the reduction rate of culturable airborne bacteria by air purifiers using a test chamber
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 37: Measurement of PM2,5 mass concentration
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 38: Determination of amines in indoor and test chamber air — Active sampling on samplers containing phosphoric acid impregnated filters
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 39: Determination of amines — Analysis of amines by (ultra-) high-performance liquid chromatography coupled to high resolution or tandem mass spectrometry
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 40: Indoor air quality management system
|
90.93 | ISO/TC 146/SC 6 |
Indoor air — Part 40: Indoor air quality management system — Amendment 1: Climate action changes
|
60.60 | ISO/TC 146/SC 6 |
Indoor air — Part 41: Assessment and classification
|
60.60 | ISO/TC 146/SC 6 |
Indoor air — Part 42: Measurement of the particle number concentration by condensation particle counters
|
60.60 | ISO/TC 146/SC 6 |
Indoor air — Part 43: Standard method for assessing the reduction rate of culturable airborne fungi by air purifiers using a test chamber
|
50.20 | ISO/TC 146/SC 6 |
Indoor air — Part 44: Test method for measuring perceived indoor air quality for use in testing the performance of gas phase air cleaners
|
60.60 | ISO/TC 146/SC 6 |
Building environment design — Indoor air quality — Methods of expressing the quality of indoor air for human occupancy
|
90.60 | ISO/TC 205 |
Environmental tobacco smoke — Estimation of its contribution to respirable suspended particles — Method based on solanesol
|
90.20 | ISO/TC 126 |
Environmental tobacco smoke —Determination of vapour phase nicotine and 3-ethenylpyridine in air — Gas-chromatographic method
|
90.20 | ISO/TC 126 |
Ambient air — Determination of the mass concentration of tire and road wear particles (TRWP) — Pyrolysis-GC-MS method
|
90.93 | ISO/TC 146/SC 3 |
Particulate air filters for general ventilation — Determination of filtration performance
|
95.99 | ISO/TC 142 |
Bamboo charcoal — Part 3: Purification applications
|
60.60 | ISO/TC 296 |
Air quality — Bulk materials — Part 1: Sampling and qualitative determination of asbestos in commercial bulk materials
|
90.60 | ISO/TC 146/SC 3 |
Air quality — Bulk materials — Part 2: Quantitative determination of asbestos by gravimetric and microscopical methods
|
90.92 | ISO/TC 146/SC 3 |
Air quality — Bulk materials — Part 2: Quantitative determination of asbestos by gravimetric and microscopical methods
|
40.20 | ISO/TC 146/SC 3 |
Air quality — Bulk materials — Part 3: Quantitative determination of asbestos by X-ray diffraction method
|
90.60 | ISO/TC 146/SC 3 |
Measurement of road tunnel air quality
|
60.60 | ISO/TC 146/SC 3 |
Air quality — Environmental meteorology — Part 4: Ground-based remote sensing of meteorological parameters — Particle backscatter lidar
|
40.00 | ISO/TC 146/SC 5 |
По запросу ничего не найдено. Пожалуйста, попробуйте изменить настройки фильтра.