Reference number
ISO 13326:1998
International Standard
ISO 13326:1998
Test methods for measuring tyre uniformity
Edition 1
1998-12
Preview
ISO 13326:1998
21715
недоступно на русском языке
Опубликовано (Версия 1, 1998)
Последний раз этот публикация был пересмотрен в  2017. Поэтому данная версия остается актуальной.

ISO 13326:1998

ISO 13326:1998
21715
Язык
Формат
CHF 96
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This International Standard specifies test methods carried out under controlled conditions for verifying the uniformity of tyres for passenger cars, commercial vehicles and motorcycles.

NOTE — Lack of uniformity around a tyre produces variations in forces applied by the tyre to the vehicle and this influence is repeated with each revolution of the tyre. At the present state of the art, however, it is impossible to manufacture perfectly uniform tyres. A rigid control of the complete manufacturing process can only minimise the unavoidable imperfections of materials, components and processes affecting uniformity.

Methods for measuring the geometrical run-out of the tyre in both radial and lateral directions are covered, as well as methods for measuring the following parameters:

-radial force variation;

-lateral force variation;

-ply steer;

-conicity.

Not all of these measurements will necessarily be relevant in every situation.

This International Standard does not include methods for measuring the static and the dynamic unbalance nor methods related to tyre-wheel assemblies.

The test methods specified in this International Standard are not intended for the gradation of tyres or the definition of quality levels.

Общая информация

  •  : Опубликовано
     : 1998-12
    : Международный стандарт подлежит пересмотру [90.92]
  •  : 1
  • ISO/TC 31
    83.160.01 
  • RSS обновления

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ