Reference number
ISO 19014-2:2022
International Standard
ISO 19014-2:2022
Earth-moving machinery — Functional safety — Part 2: Design and evaluation of hardware and architecture requirements for safety-related parts of the control system
Edition 1
2022-06
Preview
ISO 19014-2:2022
73568
недоступно на русском языке
Опубликовано (Версия 1, 2022)

ISO 19014-2:2022

ISO 19014-2:2022
73568
Язык
Формат
CHF 173
Пересчитать швейцарские франки (CHF) в ваша валюта

Тезис

This document specifies general principles for the development and evaluation of the machine performance level achieved (MPLa) of safety-control systems (SCS) using components powered by all energy sources (e.g. electronic, electrical, hydraulic, mechanical) used in earth-moving machinery and its equipment, as defined in ISO 6165.

The principles of this document apply to machine control systems (MCS) that control machine motion or mitigate a hazard; such systems are assessed for machine performance level required (MPLr) per ISO 19014-1 or ISO/TS 19014-5.

Excluded from the scope of this document are the following systems:

—    awareness systems that do not impact machine motion (e.g. cameras and radar detectors);

—    fire suppression systems, unless the activation of the system interferes with, or activates, another SCS.

Other systems or components whereby the operator would be aware of failure (e.g. windscreen wipers, head lights, etc.), or are primarily used to protect property, are excluded from this document. Audible warnings are excluded from the requirements of diagnostic coverage.

In addition, this document addresses the significant hazards as defined in ISO 12100 mitigated by the hardware components within the SCS.

This document is not applicable to EMM manufactured before the date of its publication.

Общая информация

  •  : Опубликовано
     : 2022-06
    : Международный стандарт подлежит пересмотру [90.92]
  •  : 1
  • ISO/TC 127/SC 2
    53.100 
  • RSS обновления

Новая версия в процессе разработки

Draft
International Standard
ISO/DIS 19014-2
Earth-moving machinery — Functional safety — Part 2: Design and evaluation of hardware and architecture requirements for safety-related parts of the control system
Reference number
ISO/DIS 19014-2
Edition 1
Проект Международный стандарт

ISO/DIS 19014-2

Earth-moving machinery — Functional safety

Part 2: Design and evaluation of hardware and architecture requirements for safety-related parts of the control system

ISO/DIS 19014-2

ISO/DIS 19014-2
87718
Язык
Формат
CHF 63
Пересчитать швейцарские франки (CHF) в ваша валюта

Жизненный цикл

Появились вопросы?

Ознакомьтесь с FAQ