Abstract
1 Scope
This part of ISO 7148 specifies tribological tests of metallic bearing materials for plain bearings under conditions of boundary lubrication.
The test procedures described in this part of ISO 7148 enable the friction and wear behaviour of bearing material/mating/lubricant combinations to be compared with that of other combinations, thus facilitating the selection of a bearing material for running repeatedly or for long periods under conditions of boundary lubrication, low speed and continuous sliding. Owing to differences in test conditions, measured friction and wear values can be expected to vary from one test facility to another.
The test results give useful information for practical application only if all parameters of influence are identical. The more the test conditions deviate from the actual application, the greater the uncertainty of the applicability of the results.
General information
-
Status: PublishedPublication date: 2012-10Stage: International Standard to be revised [90.92]
-
Edition: 3Number of pages: 11
-
Technical Committee :ISO/TC 123/SC 2ICS :21.100.10
- RSS updates
Next version under development
![](/modules/iso-jahia-service-module/img/iso-logo.png)
ISO/DIS 7148-1
ISO/DIS 7148-1
Plain bearings — Testing of the tribological behaviour of bearing materials
Part 1: Testing of bearing metals
Life cycle
-
Previously
WithdrawnISO 7148-1:1999
-
Now
-
Will be replaced by
Under developmentISO/DIS 7148-1
Opening hours:
Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)